• Gas Demolition Saw 14"
  • Mortar Mixer 7CF Poly Drum
  • Concrete Mixer 7CF Towable
  • Concrete Diamond Grinder 8"
  • Edco Concrete Grinder
  • Diteq Softcut Saw
  • Edco Pneumatic Tile Stripper
  • Magnesium Bullfloat 48"
  • Clipper GC55
  • Thawzall Ground Heater
<
>
    Get a Quote  👇🏻

Gas Demolition Saw 14" MAkita Model EK7651H 

The 14" MM 4-Stroke Gas power cutter is the worlds first 4 stroke power cutter. Good for wet or dry operation.
  • Automatic engine decompression valve is engineered into the cam gear to reduce pull-start force by 40%
  • Pressure compensated carburetor with vented choke plate allows for optimum fuel delivery and reduces the occurrence of flooding during cold starts
  • Integrated all aluminum wheels reduce fatigue during long straight cuts and retract when not in use to prevent unexpected movement
  • Eliminates the need for separate mixed oil/fuel can
  • Five-stage, foam-paper-nylon filtration system with advance direction air flow provides cleaner air for better engine durability
  • Lower fuel consumption at .45 gallons per hour
  • Reduced exhaust and intake carbon build-up for long cylinder life
  • Three ring piston for improved commercial engine durability
  • Clear primer bulb facilitates fuel delivery to the carburetor for easier cold starts
  • Lower noise at 92.7dB(A) and smoother idle for continuous operation
    Get a Quote  👇🏻

​mortar mixer 7 cf poly drum

​Powder paint with a durable long lasting finish. The poly drum mixers are by far the easiest cleaning units on the market. The poly drums hold up better and last longer than steel drums.High tensile strength cast iron paddle arms with wiper blades provide a clean uniform mix of up to 7-CUBIC FEET of material. Features a sturdy tumbler steel frame with forklift pocket and a heavy duty safety grate with built in bag cutter.
    Get a Quote  👇🏻

Concrete Mixer 7cf towable

​Built for high durability job after job. Featuring a 6-CUBIC-FOOT (165 LITERS) mixer and easy clean poly drum.This unit is powered by a reliable Honda GX240 gas engine. These are one of the best mixers available with heavy duty tubular steel frame and power coat paint for lasting durability. 
    Get a Quote  👇🏻

Concrete Grinder with 8" DIAMOND disc

  • TEQ-EDGE GRINDER FGE 2L
  • CAN BE USED DRY OR WET WITH THE CENTRAL WATER FEED
  • FULL FLOATING HEAD
  • VERY VERSATILE-CAN USE 8
  • VACUUM CONNECTION
  • HANDLES FOLD DOWN FOR TRANSPORT
  • 2 HP ELECTRIC WITH SINGLE PHASE ELECTRIC MOTOR WITH THERMAL OVERLOAD
  • CONVENIENT LOCATION FOR ON OR OFF
  • FULLY POWER COATED OR ZINC PLATED
  • GRINDING WHEEL: 8
  • WEIGHT: 120 LBS
  • FULL LOAD AMPS@115V: 18.4
  • RPM-DISC: 2800
  • ​REMOVING PAINT, EPOXY, THINSET, URETHANE, COATINGS AND CUT BACK ADHESIVES
  • REPAIRING WORN, DAMAGED OR SPALLED CONCRETE
  • LEVELING UNEVEN OR CURLING SLABS
  • GRINDING HARD SURFACE FEATHER EDGING SIDEWALKS, GUTTERS AND SIMILAR SURFACES
  • GRINDING HIGH AND UNEVEN JOINTS
  • REMOVING EXCESS SURFACE MATERIAL
  • LEVELING PATCHES OF PLASTIC OVERLAYS OR GROUT
  • FAST GRINDING OF ROUGH, UNEVEN SLAB SURFACES
  • MOTOR: 2 HP
  • PHASE : SINGLE
    Get a Quote  👇🏻

edco Concrete grinder

Originally developed and continuously improved by edco, grinders use horizontally rotating discs to level, smooth or clean the top surface of a concrete slab. edco grinders come with a multi-accessory disc that can be loaded with edco’s long-lasting dyma-serts, strip-serts, grinding stones or scarifies assembly to remove rough finishes, flatten uneven areas or clean concrete slabs of sealers, paints or mastic's. grinders can also be used effectively to level uneven joints or high spots of 1/16 to 1/8 inch. edco grinders provide contractors a smoother finish than scarifies or scrabblers.
  • Grinding concrete
  • Use dyma-certs
  • Surface cleaning
  • Use tungsten strip certs
  • Weight: 200 lbs
  • Removing mastics, sealers & high spots
    Get a Quote  👇🏻

diteq Softcut Saw green concrete

Patented flattrac™ contact roller wheels eliminate expensive skid plates and control spalling flattrac™ wheel system doesn’t scratch the concrete surface eliminates random cracks prevents unsightly raveling minimizes joint chipping and spalling upcut blade rotation which keeps the cut cleaner great for joint cleaning lightweight, low noise and operates virtually vibration-free uses 5 specs of green connection diamond blades adjustable telescoping handle expands up to 51 inches four wheel design for maximum stability heavy-duty 3/4” spindle shaft sealed heavy-duty ball bearings easy maneuverability for straight sawing.
    Get a Quote  👇🏻

edco Pneumatic Tile Stripper

  • Removes up to 200 sq. ft. per hour of 4″ ceramic tile set in standard thin-set
  • Provides 2,500 hits per minute
  • Ergonomic design lets operator stand upright eliminating backaches
  • High-strength tubular handle and soft foam hand grips for operator comfort
  • Quick-change, hardened steel tool chuck accepts dozens of accessories
  • Requires 6-8 cfm at 80-90 psi
    ​Get a Quote  👇🏻

Magnesium Bullfloat 48" gator kit

​Includes four 6' handles.
Get a Quote  👇🏻

Clipper GC55 Small Push Walk-Behind Saw - Gas

With a compact, light-weight design backed by the reliable Honda 5HP gasoline engine, the GC55 early entry saw is intended for a variety of applications. From green, cured or decorative concrete cutting to expansion joints, the features of this small push saw are hard to beat in a single saw. The low, wide profile of the frame, along with the front mount blade, contribute to producing a more disciplined cut.
    ​Get a Quote  👇🏻

Thawzall Ground Heater

• Hose  - 600 ft Field Hose (5/8” Hose) • Hose Unspool with one person • Supply Manifold 5 - 3/4” quick connect & 1 - 1” quick connect • Return Manifold 5 - 3/4” quick connect & 1 - 1” quick connect • Ground Thawing Capacity up to 6,000 ft2 • Concrete Curing Capacity up to 12,000 ft2 • Temporary Heating Capacity 12,000 ft2 (Varies with R-Value) • Field Pump 1/2 Hp closed Loop Centrifugal • Fuel Tank 150 US GAL DOUBLE WALL TANK • Run Time Up to 100 Hours (with Genset) •Fuel Consumption TCH 250 = 2.06 GPH, Genset = .55 GPH